0102030405
Green Laser Marking Machine FRZ-LMG – High-Quality Solutions from China Suppliers and Factory for Fine Marking
Equipment Introduction
-
International first-class quality green laser marking machine, within reach! Some materials have high absorption rates for green light with a wavelength of 532nm, so green laser has good adaptability to these materials. The focused spot of green light is extremely small, and the processing heat affected zone is minimal, making it more suitable for ultra-fine marking of materials such as glass and plastic;
-
Adopting high-performance imported green laser, the laser beam quality is superior, bringing users almost perfect marking effect;
-
The option to use a rotating dual workstation worktable greatly reduces the loading/unloading time, resulting in a doubling of customer value within the same time;
-
Equipped with safety protective covers that meet export standards and have passed CE certification, to avoid personal injury caused by equipment operators' misoperation and minimize safety risks;
-
Adopting a water cooling system.
Application areas
The Friends brand green laser marking machine is used for fine marking, cutting, and microfabrication of special materials. It is mainly used for marking and surface treatment of various materials such as glass, LCD screens, textiles, thin ceramics, semiconductor silicon wafers, IC grains, sapphire, polymer films, etc.
Technical parameters
| Equipment Model | FRZ-LMG7 | FRZ-LMG10 | FRZ-LMG20 |
| Average output power(W) | 7W □ | 10W □ | 20w □ |
| Wave Length | 532nm | ||
| Maximum sculpture speed | 7000mm/s | ||
| Repetition frequency range | 20-200KHz | ||
| Marking area | 70mm*70mm、110mm*110mm、150mm*150mm、175mm*175mm、200mm*200mm、310mm*310mm(可选Optional) | ||
| Min character height | 0.06mm | ||
| Minimum line width | 0.03mm (Depend on material) | ||
| Environmental temperature | 10°C-35°C | ||
| Power supply | AC220V/50Hz; 1.5KW | ||
| Cooling mode | Water cooling | ||
| Shields | Optional | ||
| Purifier | Optional | ||
Equipment pictures
Samples pictures
IC Heat-Sink Marking
Glass Marking
Videos
Frequently Asked Questions
Q:What materials are best suited for the green laser marking machine?
The green laser marking machine is highly adaptable to materials with high absorption rates for 532nm light. It is ideal for ultra-fine marking, cutting, and microfabrication on glass, LCD screens, textiles, thin ceramics, semiconductor silicon wafers, IC grains, sapphire, and polymer films.
Q:Why is the green laser marking machine ideal for ultra-fine processing?
Because the focused spot of the 532nm green light is extremely small, and the processing heat-affected zone is minimal. This prevents thermal damage and allows for precise, ultra-fine marking on heat-sensitive materials like glass and plastic.
Q:What power options are available for the FRZ-LMG series?
The series offers three power configurations to meet different processing requirements: FRZ-LMG7 (7W), FRZ-LMG10 (10W), and FRZ-LMG20 (20W). All models operate at a 532nm wavelength.
Q:How does the dual workstation worktable benefit operation?
The optional rotating dual workstation worktable allows operators to load and unload materials on one station while the other station is processing. This significantly reduces idle time and doubles production efficiency.
Q:What safety certifications and protection does this machine have?
The equipment is equipped with safety protective covers that meet international export standards and have passed CE certification. This design minimizes safety risks and prevents operator injury from misoperation.
Q:What cooling system does the green laser marking machine use?
The machine utilizes an integrated water cooling system to ensure efficient heat dissipation, maintaining stable performance during continuous high-precision operations.